What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Home Armor E-Z Deck and Fence Wash Mold Stain Remover-04/16/2015-Old Product
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaHome Armor E-Z Deck and Fence Wash Mold Stain Remover quickly and easily cleans away exterior stains caused by mold and mildew from wood decks, fencing and siding. It is guaranteed to work in just 10 minutes. There is no mixing or scrubbing. E-Z Deck and Fence Wash is biodegradable and environmentally friendly.
Purpose of product.
Usage: Deck and fence cleanerStructure such as solid, liquid, aerosol etc.
Form: liquidDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 20242105 Channel Avenue
Memphis TN 38113
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Sodium hypochlorite 007681-52-9 <10 Yes 
CoC List
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :April 16, 2015 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING2 0 0 Measure of Alkalinity/Acidity of substance or preparation where a level of 7 is considered as neutral.
pH Levels12.5-13.0 -
Warnings
Hazard Statements
Danger. Causes severe skin burns and eye damage. Causes serious eye damage.
Precautionary Statements
Do not breathe mist/spray. Wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection.
Response
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.
Storage
Store locked up.
Disposal
Dispose of contents/container according to local, state and federal regulations. -
Acute health effects
From SDS:
Hazards Identification
Danger. Causes severe skin burns and eye damage. Causes serious eye damage..
Potential Health Effects
Eye Contact: This material is an eye irritant and may cause burns to the eyes.
Skin Contact: This product is a skin irritant. May cause drying of skin, rash, blisters, and cracking. May cause burns to broken skin.
Inhalation: Inhalation of fumes or mists may cause irritation of the respiratory tract and mucous membranes. If sodium hypochlorite is mixed with ammonia or other chemicals, evolution of chlorine or chlorine based compounds results. These gases can produce pulmonary edema.
Ingestion: May be corrosive to the mouth and throat, mucous membranes, and stomach. May cause burns of the tissues, severe abdominal pains, nausea, vomiting, circulatory collapse, confusion, delirium, coma, and collapse. Swallowing large quantities can be fatal. -
Chronic health effects
From SDS:
Prolonged or repeated contact may cause irritation and dermatitis. May cause constant irritation of eyes and respiratory tract. -
Carcinogenicity
Not listed.
-
Handling information
Read carefully all cautions and directions on product label before use. Since empty container retains residue, follow all label warnings even after container is empty. Dispose of empty container according to all regulations. Do not reuse this container. Keep container tightly closed when not in use. Store in a cool, dry place. Protect from freezing. Avoid extreme high or low temperatures.
-
Disposal information
Dispose in accordance with applicable local, state, and federal regulations.
-
First Aid
Eye contact: Immediately flush eyes with water, remove any contact lens, continue flushing with water for at least 15 minutes. Get medical attention.
Skin contact: Wash with soap and large quantities of water for at least 15 minutes. Seek medical attention if irritation from contact persists.
Inhalation: If user experiences breathing difficulty, move to air free of vapors. Administer oxygen or artificial respiration until medical assistance can be rendered.
Ingestion: Drink one or two glasses of water or milk. Never attempt to give anything by mouth to an unconscious person. Call your poison control center, hospital emergency room, or physician immediately.
Notes to Physician: Call your local poison control center for further instructions.
-
UN Global Harmonization Classification
